Personal Care

Much like our original bar soap, this product was initially created to help wrestlers fight the skin infections associated with their sport. Defense shower gel is an organic body wash made with all-natural ingredients and is both vegan and Non-GMO. This gel soap has a coconut oil base, which moisturizes and soothes dry and irritated skin. We recommend this product over our bar soap for those who are susceptible to dry skin, especially after washing. The quality of our shower gel, much like our soap, lies in the smooth, thick, and rich lather it produces. Lather is essential in both delivering the natural ingredients to the skin and also serving as a transport to trap dirt and remove it from the skin completely as it rinses clean. The natural tea tree and eucalyptus oil that we use in our shower gels provide a spectrum of antimicrobial benefits and promote healthy skin. Our gels never contain any parabens, sulfates, SLS, triclosan, or fragrances. This product is made in the USA.

Original Ingredients: Saponified Organic Oils of Coconut, Olive and Jojoba, Vegetable Glycerin, Organic Guar Gum, Tea Tree Essential Oil, Eucalyptus Essential Oil, Rosemary Extract, Organic Aloe Vera.

Peppermint Ingredients: Saponified Organic Oils of Coconut, Olive and Jojoba, Vegetable Glycerin, Organic Guar Gum, Peppermint Essential Oil, Tea Tree Essential Oil, Eucalyptus Essential Oil, Rosemary Extract, Organic Aloe Vera.

Defense original body wipes contain the same 100% natural essential oils as our bar soaps and shower gels. Our body wipes are not intended to replace showering but to cleanse the skin when you are unable to take a shower within four hours of training or competing. This four hour period is the critical window for contagions to develop. They are designed to be portable for easy use and our thick cloth is durable enough for heavy use. Our wipes fit perfectly in the side pouch of any gear pack or can be easily thrown into a duffel bag without leaking. The natural tea tree and eucalyptus oil that we use in our body wipes provide a spectrum of antimicrobial benefits and promote healthy skin. Our wipes never contain any parabens, sulfates, SLS, triclosan, or fragrances. This product is made in the USA.

Original Ingredients: Distilled Water, Tea Tree Oil, Eucalyptus Oil, and Coco Glucoside.

Peppermint Ingredients: Distilled Water, Tea Tree Oil, Eucalyptus Oil, Peppermint Oil, and Coco Glucoside.

The product that started it all! This product was originally created to help wrestlers fight the skin infections associated with their sport. Our original bar soap continues to be our most popular and best-selling soap. Defense Soap’s bars are triple milled, meaning they are made and broken down three different times for consistency and quality. This creates a denser bar soap that lasts longer. The quality of our bar allows for a smooth, thick, and rich lather that collects and traps dirt, ensuring it is transported away from the skin when it is rinsed free. The natural tea tree and eucalyptus oil that we use in our bars provide a spectrum of antimicrobial benefits and promote healthy skin. Our bar soaps are made with all natural ingredients, free from parabens, sulfates, SLS, triclosan, and fragrances. This product is made in the USA.

Original Ingredients: Sodium Palmate, Sodium Palm Kernelate, Water, Glycerin, Sodium Gluconate, Eucalyptus Globulus Leaf Oil, Melaleuca Alternifolia (Tea Tree) Leaf Oil, Palm Acid, Sodium Chloride, Palm Kernel Acid.

Peppermint Ingredients: Sodium Palmate, Sodium Palm Kernelate, Water (Aqua), Glycerin, Sodium Gluconate, Melaleuca Alternifolia (Tea Tree) Leaf Oil, Mentha Piperita (Peppermint) Oil, Palm Acid, Eucalyptus Globulus Leaf Oil, Sodium Chloride, Palm Kernel Acid.

Oatmeal Ingredients: Sodium Palmate, Sodium Palm Kernelate, Water, Glycerin, Sodium Gluconate, Eucalyptus Globulus Leaf Oil, Melaleuca Alternifolia (Tea Tree) Leaf Oil, Palm Acid, Sodium Chloride, Palm Kernel Acid, Avena Sativa (Oat) Kernel Flour, Avena Sativa (Oat) Kernel Meal.

Defense original foaming face and hand soap is organic and both vegan and Non-GMO. The rich, foam lather promotes thorough washing and rinses clean for naturally soothed and refreshed skin. The natural tea tree and eucalyptus oil that we use in our foaming soaps provide a spectrum of antimicrobial benefits and promote healthy skin.  Our foaming soaps never contain any parabens, sulfates, SLS, triclosan, or fragrances. We also offer a foaming hand soap refill that will fill up your original bottle up to four times. This product is made in the USA.

Original Ingredients: Saponified Organic Oils of Coconut, Olive and Jojoba, Vegetable Glycerin,  Tea Tree Essential Oil, Eucalyptus Essential Oil, Rosemary Extract, Organic Aloe Vera.

Peppermint Ingredients: Saponified Organic Oils of Coconut, Olive and Jojoba, Vegetable Glycerin, Peppermint Essential Oil, Tea Tree Essential Oil, Eucalyptus Essential Oil, Rosemary Extract, Organic Aloe Vera.

Our natural oatmeal bar soap has added oatmeal for the natural benefits it provides. The oatmeal in our soap contains saponins, which are natural cleaning agents that help remove excess sebum, dirt, and dead skin cells from deep within the skin’s pores. Oatmeal is also rich in fatty acids and contains polysaccharides, each of which provides hydrating benefits as a great skin moisturizer. Defense Soap’s bars are triple-milled, meaning they are made and broken down three different times for consistency and quality. This creates a denser bar soap that lasts longer. The quality of our bar allows for a smooth, thick, and rich lather that collects and traps dirt, ensuring it is transported away from the skin when it is rinsed free. The natural tea tree and eucalyptus oil that we use in our bars provide a spectrum of antimicrobial benefits and promote healthy skin. Our bar soaps are made with all-natural ingredients, free from parabens, sulfates, SLS, triclosan, and fragrances. This product is made in the USA.

Oatmeal Ingredients: Sodium Palmate, Sodium Palm Kernelate, Water, Glycerin, Sodium Gluconate, Eucalyptus Globulus Leaf Oil, Melaleuca Alternifolia (Tea Tree) Leaf Oil, Palm Acid, Sodium Chloride, Palm Kernel Acid, Avena Sativa (Oat) Kernel Flour, Avena Sativa (Oat) Kernel Meal.

Original Ingredients: Sodium Palmate, Sodium Palm Kernelate, Water, Glycerin, Sodium Gluconate, Eucalyptus Globulus Leaf Oil, Melaleuca Alternifolia (Tea Tree) Leaf Oil, Palm Acid, Sodium Chloride, Palm Kernel Acid.

Peppermint Ingredients: Sodium Palmate, Sodium Palm Kernelate, Water (Aqua), Glycerin, Sodium Gluconate, Melaleuca Alternifolia (Tea Tree) Leaf Oil, Mentha Piperita (Peppermint) Oil, Palm Acid, Eucalyptus Globulus Leaf Oil, Sodium Chloride, Palm Kernel Acid.

Defense Healing Salve is an extremely high quality all natural salve designed to aid in the healing of mat burns, small scrapes and scratches suffered in practice. Defense Healing Salve contains 5% of our active ingredients in an all natural botanical base consisting of chickweed, plantain, comfrey, yarrow, calendula, goldenseal, marshmallow, olive oil, grape seed oil, beeswax, almond oil, vitamin E, essential oils blend of tea tree, eucalyptus and thyme.. The Defense Healing Salve can also be used in conjunction with Defense Pure Essential Oil.

Defense laundry booster is a laundry additive that acts as a deodorizer that treats your wash. This product protects fabrics from stains and odors caused by bacteria and mold and it is easily applied to your rinse cycle with your preferred detergent. Our laundry booster will continually and proactively prevent odors, staining, and deterioration without reducing the wick-ability or performance of the fabric for up to 30 washings. You will soon notice the absence of mildew and sweat odors on your clothes and gear.  It is suitable for use in all washing machines including high efficiency (HE) models. One 32 oz bottle treats up to 480 loads and is hypoallergenic, making it great for people with sensitive skin. This product is free of any dyes and perfumes. This product is made in the USA.

Ingredients: Deionized water, Surfactants, and Organosilane Quaternaries.

Defense essential oils is our powerful blend of tea tree, eucalyptus, and jojoba oils. These natural essential oils provide a spectrum of antimicrobial benefits and promote healthy skin. This product is hypoallergenic and specially formulated for sensitive skin. Our essential oils never contain any parabens, sulfates, SLS, triclosan, or fragrances. For best results, apply our essential oils to affected areas first and then apply our natural salve to the same area. This product is made in the USA.

Ingredients: 50% Australian Tea Tree Oil, 25% Eucalyptus Oil, and 25% Jojoba Oil.

Defense premium shaving soap is designed to help nourish and enrich the skin during the shaving process. Our shaving soap produces a thick protective lather, provides proper beard hydration, and protects and hydrates your skin. Defense Soap’s bars are triple-milled, meaning they are made and broken down three different times for consistency and quality. The natural tea tree oil and eucalyptus oil that we use in our bars provide a spectrum of antimicrobial benefits and promote healthy skin. Typical shaving soap is characterized by a total fatty matter (TFM) content of between 30-50% Defense premium shaving soap has a TFM of 77%, making it far more effective with less product needed. The sandalwood scent in this shave bar calms, soothes, and relaxes. Our shaving soap is made with all-natural ingredients, free from parabens, sulfates, SLS, triclosan, and fragrances. This product is made in the USA.

Ingredients: Sodium Palm Kernelate, Sodium Palmate, Water, Potassium Palm Kernelate, Palm Kernel Acid, Fragrance (Parfum), Potassium Palmate, Theobroma Cacoa (Cocoa) Seed Butter, Sodium Gluconate, Allantoin, Titanium Dioxide (C177891), Xanthan Gum, Glycerin, Palm Acid, Sodium Chloride, Aloe Barbadensis Leaf Juice, Maltodextrin, Eucalyptus Globulas Leaf Oil, Melaleuca Alternifolia (Tea Tree) Leaf Oil.

A Maximum Wear favorite, famous for its dullness and reliable hold. 

• Professional Use Only
• Systems: All
• Dullness: Dull (great for lace)
• Gentleness: Hypoallergenic
• Residue: Medium
• Liner: Blue (tape is clear)
• Hold: 2-3 Weeks
• Apply with care: its comfortable mesh construction can tear when stretched
• Store at room temperature, below 90°F
• Test on small area before use
• Thickness: 8.5 MILs

Caution: Store below 90°F. Test on small area before use. Keep out of reach of children. External use only. Avoid eye contact.

Directions: Peel the tape from the roll and cut desired length. The adhesive side is placed towards unit. Avoid touching adhesive. Place the cut piece where desired on the hair system. Repeat as needed. When ready to apply to the scalp, peel off the remaining liner pieces. For easier application use Just-Rite Positioning Spray.

C-22 is the best and most popular adhesive remover we make. Why? Because C-22 is the best skin safe remover in the world. We have tested every other product put out by ourselves and competitors against C-22 and it still holds the top spot. Not only is C-22 gentle on skin, but it works FAST! Did we mention it has a fresh scent and it’s easy to rinse with soap and water? You can’t go wrong when you go with the best.

THE BASICS

• Gentle on Skin
• Rinses With Soap and Water
• Fast Acting
• Flammable

AVAILABLE SIZE

• 118 ml (4 floz)
• 354 ml (12 floz)

DIRECTIONS

Spray on adhesives. Reaction time in as little as one minute depending on adhesive buildup. Wipe or brush off residue. Shampoo and rinse.

INGREDIENTS

Organic Wetting Agents, Petroleum Hydrocarbons, Citrus Oils, and Lanolin

CAUTIONS

Do not use or store near open flame. Do not apply on irritated skin. Avoid eye contact. Keep out of reach of children. Test on small area before use. Do not leave on silicone bases more than 2-3 minutes.

Ultra Hold is the leading standard for soft bonds on the market for over 15 years and is our most popular Maximum Wear adhesive. An acrylic adhesive with consistent 4+ week hold times. Ultra Hold changed the industry by creating an acrylic adhesive that is better than the previously dominant silicone based adhesives. It dries clear and removes easily and has a quick cleanup for a liquid adhesive. Plus it dries clear, and stays strong! Ultra-Hold is a rock solid choice for a long term hold.

HOLD

Maximum Wear (3-5 weeks) adhesives are the longest lasting adhesives we make. Depending on temperature, humidity, and body oils, they can last up to six weeks. Usually the most tacky, they require more skill to apply.

AVAILABLE SIZES

• Brush-on 15ml (0.5 floz)
• No Brush 15ml (0.5 floz)
• Brush-on 41.4ml (1.4 floz)
• Brush-on 100.5ml (3.4 floz)

DIRECTIONS

Before bonding, prepare skin and base with 99% Alcohol to remove residues. Then, apply a thing layer of adhesive to the skin and base, and blow dry until very tacky. Next, press the hair system onto the skin and hold firmly for 10 seconds. Do not swim, workout, or shampoo for at least 24 hours.

INGREDIENTS

Acrylic Adhesive, Isopropanol, Ethyl Acetate, Heptane, Toluene

CAUTIONS

Close cap tightly. Do not breathe fumes. Store below 90 degrees. Test on small area before use.

Ultra Hold is the leading standard for soft bonds on the market for over 15 years and is our most popular Maximum Wear adhesive. An acrylic adhesive with consistent 4+ week hold times. Ultra Hold changed the industry by creating an acrylic adhesive that is better than the previously dominant silicone based adhesives. It dries clear and removes easily and has a quick cleanup for a liquid adhesive. Plus it dries clear, and stays strong! Ultra-Hold is a rock solid choice for a long term hold.

HOLD

Maximum Wear (3-5 weeks) adhesives are the longest lasting adhesives we make. Depending on temperature, humidity, and body oils, they can last up to six weeks. Usually the most tacky, they require more skill to apply.

AVAILABLE SIZES

• Brush-on 15ml (0.5 floz)
• Brush-on 41.4ml (1.4 floz)
• Brush-on 100.5ml (3.4 floz)
• 473ml (16 oz)

DIRECTIONS

Before bonding, prepare skin and base with 99% Alcohol to remove residues. Then, apply a thing layer of adhesive to the skin and base, and blow dry until very tacky. Next, press the hair system onto the skin and hold firmly for 10 seconds. Do not swim, workout, or shampoo for at least 24 hours.

INGREDIENTS

Acrylic Adhesive, Isopropanol, Ethyl Acetate, Heptane, Toluene

CAUTIONS

Close cap tightly. Do not breathe fumes. Store below 90 degrees. Test on small area before use.

Action is the fastest skin-safe solvent we produce. It will cut through adhesive quickly and will leave very little oily residue.

THE BASICS

• Skin Safe
• Rinses With Soap and Water
• Non Oily
• Flammable

DIRECTIONS

Spray on adhesive area. Breakdown will begin in seconds. The release time will depend on adhesive buildup. Remove residue, shampoo, and rinse.

INGREDIENTS

Citrus Oils, Petroleum Hydrocarbons, Lanolin, Proprietary Fragrance Mixture

CAUTIONS

Do not use or store near open flame. Do not leave on silicone bases more than 2-3 minutes. External use only. Avoid eye contact.

We’ve made our classic product even better. Not only is it more affordable than the original Extenda-Bond, it comes with more strips per box. It also has a better box design that features a perforated lid that can be torn off for easy access in your salon. More strips, better box, no brainer.

Extenda-Bond Plus is super strong and super flexible. It features our fingerprint technology to make it basically invisible under any unit. The liner is blue and white but the actual tape is clear.

Hold: Maximum wear (2-4+ weeks) tapes are the longest lasting tapes we make. Depending on temperature, humidity, and body oils, they can last up to six weeks. Because they’re usually the most tacky, they require more skill to apply.

Releases adhesive from mesh, lowering risk of damage to fragile systems.

• Systems: Mesh
• Base: Alcohol
• Gentleness: Skin safe
• Breakdown speed: Slow
• Residue: None
• Cleanup: None
• Fragrance: Alcohol
• Flammable

Ingredients: Medical Grade Dimethylcarbinol, Mineral Oil, Propylene Glycol, FD&C B1

Directions: Apply Lace Release generously through the unit towards the scalp. Wait for 30 seconds. Repeat once more. Gently lift the system away from the head. Shampoo and rinse.

Cautions: Close cap tightly. Do not apply to broken, cut, or irritated skin. Do not leave on skin for more than 30-45 minutes. Do not breathe fumes. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use. Do not store or use near heat, sparks, or open flame. Store at room temperature, below 90°F.

We’ve made our classic product even better. Not only is it more affordable than the original Extenda-Bond, it comes with more strips per box. It also has a better box design that features a perforated lid that can be torn off for easy access in your salon. More strips, better box, no brainer.

Extenda-Bond Plus is super strong and super flexible. It features our fingerprint technology to make it basically invisible under any unit. The liner is blue and white but the actual tape is clear.

Hold: Maximum wear (2-4+ weeks) tapes are the longest lasting tapes we make. Depending on temperature, humidity, and body oils, they can last up to six weeks. Because they’re usually the most tacky, they require more skill to apply.

A Maximum Wear favorite, famous for its dullness and reliable hold. 

• Professional Use Only
• Systems: All
• Dullness: Dull (great for lace)
• Gentleness: Hypoallergenic
• Residue: Medium
• Liner: Blue (tape is clear)
• Hold: 2-3 Weeks
• Apply with care: its comfortable mesh construction can tear when stretched
• Store at room temperature, below 90°F
• Test on small area before use
• Thickness: 8.5 MILs

Caution: Store below 90°F. Test on small area before use. Keep out of reach of children. External use only. Avoid eye contact.

Directions: Peel the tape from the roll and cut desired length. The adhesive side is placed towards unit. Avoid touching adhesive. Place the cut piece where desired on the hair system. Repeat as needed. When ready to apply to the scalp, peel off the remaining liner pieces. For easier application use Just-Rite Positioning Spray.

• Very comfortable
• Strongest initial hold
• Professional Use Only
• Dullness: Semi-Dull
• Residue: High
• Liner: White (tape is clear)
• Carrier: Stretchy
• Hold: 4-6 Weeks
• Store at room temperature, below 90°F
• Test on small area before use
• Thickness: 11.5 MILs

Directions: Peel the liner off and place onto the extension weft. Avoid touching adhesive. Place the tab onto the extension weft. Repeat as needed. When ready to apply to the extensions, peel off the remaining tabs and install to the hair.

Caution: Store below 90°F. Test on small area before use. Keep out of reach of children. External use only. Avoid eye contact.

Duo-Pro is the first differential tape designed exclusively for hair extensions. One side is optimized for hair adhesion and the other is designed to bond to the hair extension. This allows for a stronger and more secure hold with the quickest cleanup on the market. Duo-Pro is a game changer and will make the hair extension experience so much easier for both you and your clients. The liner is white but the actual tape is clear.

HOLD

Extended Hold (4-6 Weeks)

OTHER PRODUCTS WE RECOMMEND

PREPARATION

Extension Prep Shampoo should always be the first step in preparing for an install. Extension Prep Shampoo breaks down adhesives, scrubs the skin, and cleans the hair in one step.

REMOVAL

C-22 is the #1 adhesive remover we make. Not only is it gentle on skin, but it works FAST. It also has a fresh scent (it’s citrus based) and it’s easy to rinse with soap and water.

If you’re looking for something with less oily residue, Extension Release is a great option. It is the fastest skin-safe solvent we produce. It will cut through adhesive quickly and will leave very little oily residue.

Extension Release is our most popular hair extension tape remover. It’s famous for working very fast. It’s also alcohol based so it doesn’t leave residue. It won’t disintegrate and melt your tapes into a mess. It will leave the tape intact so you can peel it off in one piece.

THE BASICS

• Non-Oily
• Fast Acting
• Flammable

AVAILABLE SIZES

• 118 ml (4 floz) Drop-Top
• 118 ml (4 floz) Spray

DIRECTIONS

Apply the solution over the area you wish to remove. Wait for one minute, then begin working the bond loose. Apply more solution if needed.

INGREDIENTS

Technical Grade Dimethylcarbinol, Mineral Oil, Propylene Glycol, FD&C Yellow 5, FD&C Blue 1

CAUTIONS

Do not put near open flame. External use only. Do not store over 120 degrees. Close top promptly after use.

OTHER PRODUCTS WE RECOMMEND

–Extension Prep Shampoo breaks down adhesives, scrubs the skin, and cleans the hair in one step. It’s great before installation to prepare the hair and scalp for hair system bonding. It’s also the perfect product to remove any oily residues or leftover adhesive residue after removal.

Ultra Hold is the leading standard for soft bonds on the market for over 15 years and is our most popular Maximum Wear adhesive. An acrylic adhesive with consistent 4+ week hold times. Ultra Hold changed the industry by creating an acrylic adhesive that is better than the previously dominant silicone based adhesives. It dries clear and removes easily and has a quick cleanup for a liquid adhesive. Plus it dries clear, and stays strong! Ultra-Hold is a rock solid choice for a long term hold.

HOLD

Maximum Wear (3-5 weeks) adhesives are the longest lasting adhesives we make. Depending on temperature, humidity, and body oils, they can last up to six weeks. Usually the most tacky, they require more skill to apply.

AVAILABLE SIZES

• Brush-on 15ml (0.5 floz)
• Brush-on 41.4ml (1.4 floz)
• Brush-on 100.5ml (3.4 floz)

DIRECTIONS

Before bonding, prepare skin and base with 99% Alcohol to remove residues. Then, apply a thing layer of adhesive to the skin and base, and blow dry until very tacky. Next, press the hair system onto the skin and hold firmly for 10 seconds. Do not swim, workout, or shampoo for at least 24 hours.

INGREDIENTS

Acrylic Adhesive, Isopropanol, Ethyl Acetate, Heptane, Toluene

CAUTIONS

Close cap tightly. Do not breathe fumes. Store below 90 degrees. Test on small area before use.

Extension Release is our most popular hair extension tape remover. It’s famous for working very fast. It’s also alcohol based so it doesn’t leave residue. It won’t disintegrate and melt your tapes into a mess. It will leave the tape intact so you can peel it off in one piece.

THE BASICS

• Non-Oily
• Fast Acting
• Flammable

AVAILABLE SIZES

• 118 ml (4 floz) Drop-Top
• 118 ml (4 floz) Spray

DIRECTIONS

Apply the solution over the area you wish to remove. Wait for one minute, then begin working the bond loose. Apply more solution if needed.

INGREDIENTS

Technical Grade Dimethylcarbinol, Mineral Oil, Propylene Glycol, FD&C Yellow 5, FD&C Blue 1

CAUTIONS

Do not put near open flame. External use only. Do not store over 120 degrees. Close top promptly after use.

OTHER PRODUCTS WE RECOMMEND

–Extension Prep Shampoo breaks down adhesives, scrubs the skin, and cleans the hair in one step. It’s great before installation to prepare the hair and scalp for hair system bonding. It’s also the perfect product to remove any oily residues or leftover adhesive residue after removal.

Weft Release  works fast and has a great smell. It’s low-cost and works great on all types of tape bonds. It won’t disintegrate and melt your tapes into a mess. It will leave the tape intact so you can peel it off. It has a pleasant fragrance and very little oily-residue.

THE BASICS

• Very Little Oily Residue
• Fast Acting
• Great Smell
• Flammable

AVAILABLE SIZES

• 118 ml (4 floz ) Drop-Top
• 118 ml (4 floz ) Spray

DIRECTIONS

Apply the solution over the area you wish to remove. Wait for one minute, then begin working the bond loose. Apply more solution if needed. When complete, rinse the area with soap and water to remove residue.

INGREDIENTS

Hydrocarbon Solvent with Added Fragrance

CAUTIONS

Keep away from heat, sparks or open flame. Avoid breathing fumes and prolonged skin contact. Do not take internally, and avoid eye contact.

OTHER PRODUCTS WE RECOMMEND

–Extension Prep Shampoo breaks down adhesives, scrubs the skin, and cleans the hair in one step. It’s great before installation to prepare the hair and scalp for hair system bonding. It’s also the perfect product to remove any oily residues or leftover adhesive residue after removal.

Weft Release  works fast and has a great smell. It’s low-cost and works great on all types of tape bonds. It won’t disintegrate and melt your tapes into a mess. It will leave the tape intact so you can peel it off. It has a pleasant fragrance and very little oily-residue.

THE BASICS

• Very Little Oily Residue
• Fast Acting
• Great Smell
• Flammable

AVAILABLE SIZES

• 118 ml (4 floz ) Drop-Top
• 118 ml (4 floz ) Spray

DIRECTIONS

Apply the solution over the area you wish to remove. Wait for one minute, then begin working the bond loose. Apply more solution if needed. When complete, rinse the area with soap and water to remove residue.

INGREDIENTS

Hydrocarbon Solvent with Added Fragrance

CAUTIONS

Keep away from heat, sparks or open flame. Avoid breathing fumes and prolonged skin contact. Do not take internally, and avoid eye contact.

OTHER PRODUCTS WE RECOMMEND

–Extension Prep Shampoo breaks down adhesives, scrubs the skin, and cleans the hair in one step. It’s great before installation to prepare the hair and scalp for hair system bonding. It’s also the perfect product to remove any oily residues or leftover adhesive residue after removal.